Module A-161 is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160). The A-161 requires an Clock Divider A-160 and has to be mounted directly to the right of the A-160.

Eight outputs are sequentially switched by the clock signals from the A-160 and can act, for instance, as sequential rhythmic triggers for an envelope. The reset on the A-160 also works on the A-161 (instant return to Step 1).

The low/high levels of the output signals are 0V and about +10V.

In combination with a mixer (A-138) short analog sequences can be generated.

Merk:

Doepfer

Type:

Trigger Sequencer

Nummer:

A-161

Diepte:

40mm

Breedte:

4HP

Power:

20mA @ +12V, 0mA @ -12V

Metron is a 16-channel trigger and gate sequencer for Eurorack with extensive functions, expansion possibilities and the tools you need to create long sequences with many variations in a very short time.

The sequencer allows pattern lengths of up to 256 steps, and the number of steps per channel can be varied to create interesting and varied rhythmic structures. These patterns can be quickly stored and exchanged between units via the SD card slot. Metron also offers a random function per step and a ratcheting function.

With the optional WMD Voltera, Metron can be expanded with four additional bipolar voltage outputs.

 Features:

• 16 Channels of trigger and gate signals
• intuitive drum sequencer 
• View 4 channels at a time and easily switch views
• Single track view lets you zoom in on a single track and see 64 steps at a time
• Up to 256 step pattern length
• Different pattern lengths per channel
• Five instantly recallable, editable variations
• View and edit variations that are not playing for easy cue and non stop performance play
• Save patterns to SD memory for easy recall on power cycle
• No-stop loading from memory
• Easy view memory previews lets you see a pattern before loading from memory.
• SD allows for easy update as well as easy back up / file transfer from unit to unit
• FX / Fills for instant / momentary variation
• 2 assignable inputs for external CV control
• Tap in patterns with quantized recording with the buttons or external source
• Quick copy / paste / clear functions
• Internal clock with Swing
• dedicated reset output
• MIDI Preset mode lets you send MIDI messages to other modules on the Doepfer CV bus.  (for use with WMD SSM, Malekko Voltage Block, and more)
• Random Pattern Generation
• Probability per step and group probability functions
• Burst per step for ratchet / roll sounds
• Custom Fill Patterns for instant fills
• Trigger Mutes
• Step looping
• Manual gates

Merk:

WMD

Type:

Clock, Trigger, Sequencer

Naam:

Metron

Diepte:

31mm

Breedte:

36HP

Power:

180mA @ +12V, 0mA @ -12V

Voltera is an expander for the Metron trigger and gate sequencer, adding 4 bipolar voltage tracks. Up to 16 Volteras can be connected to a Metron, providing up to 64 CV outputs.

With independent voltage ranges and quantisation settings per track, Voltera allows simultaneous real-time control of 4 different parameters, so you can set the track to the parameter you are sequencing.

When used in conjunction with Voltera, it is possible to easily sequence melodies and parameters with the Metron.

Features

• 4 bipolar voltage outputs in 4HP
• Integrated user interface with Metron
• Quantised and unquantised voltages
• Up to 16 Voltera modules can be connected simultaneously to a Metron
• Independent voltage ranges for each output
• Analogue programming
• Digital accuracy
• Fast haptic operation

Merk:

WMD

Type:

Sequencer

Naam:

Voltera

Diepte:

43mm

Breedte:

4HP

Power:

60mA @ +12V, 15mA @ -12V

Simply put, Arpitecht is a voltage controlled Quantizer and rhythmic arpeggio generator.  As one of our most musical modules to date, Arpitecht is designed to be an inspiring tool for the modular musician.  

With Arpitecht, you can create intricate melodies that span 8 octaves, imply chord changes, instant acid basslines, evolving generative sequences, and, using the Triad expander, polyphonic chord generation.

Arpitecht features 16 scales, each with a unique set of "note masks" offering hundreds of note combinations with the ability to dial in via knobs on the front panel or CV. 32 rhythm patterns and 32 slide patterns all with CV control let you feed a static clock into it and get unique, evolving patterns of gates and note changes.

Triad expander module allows you to create uniquely voiced chords in the same key underneath your arpeggios. 

Features:

• Voltage controlled Quantizer and Arpeggio Generator.
• 16 scales
• Hundreds of note combinations possible
• Inspiring to creativity and easy to "land" somewhere new
• 5 octave range arpeggiation range
• +-1 octave transpose range
• Intuitive front panel and "keyboard" LED layout
• Rhythm and Slide Rhythm options for added variety to your arpeggio

Merk:

WMD

Type:

Quantizer, Sample & Hold, Random, Sequencer

Naam:

Arpitecht

Diepte:

30mm

Breedte:

12HP

Power:

70mA @ +12V, 35mA @ -12V

The MeloDICER is Vermona's vision of a sequencer with the perfect balance between stochastic and deterministic creation of rhythm and melody. Its algorithms generate random values that magically turn into musical events.

It can generate its own tempo using the TAP button or it can be synced to an external clock source.

The rhythm section has four controls labelled with Note Value, Variation, Legato and Rest, allowing to manipulate the length of the notes, their duration and placement in the pattern. With the Rest knob, the meloDICER randomly adds musical rests to the pattern.

The semitone probability faders which are labelled from C to B set the probability for each semitone to appear in the pattern. As a visual support, the faders’ LED goes on for the duration of the corresponding note.

The overall output range of the meloDICER is up to five octaves which is controlled by the two Range faders, allowing to set the lowest and highest note separately.

With each press on the DICE buttons, the meloDICER generates new random values for the rhythm respectively the melody section. We call that behavior dice-mode. The counterpart of dice-mode is realtime-mode. Press and hold one or both DICE buttons for a second until the corresponding LED goes off. In realtime-mode, there is no repeated pattern. MeloDICER continuously generates new random values, based on the parameters you set for the corresponding section.

The encoder allows to control the pattern length by setting the first and last step, and to store up to 16 patterns.

The module also offers two CV inputs and two gate inputs for controlling various parameters.

Furthermore, the Melodicer features two quantizer modes, allowing to work as quantizer for external CV signals. The faders of the melody section define the scale.

The Vermona MEX3 expander module can be connected to output Midi data.

Merk:

Vermona

Type:

Sequencer

Naam:

MeloDICER

Diepte:

25mm

Breedte:

34HP

Power:

150mA @ +12V, 50mA @ -12V

The core of randomRHYTHM is a superb random generator that creates values for each event. Event is the term for the individual note values - randomRHYTHM offers quarter-, eighths-, sixteenth- and triplet-events.

Beside the random value, each event has its own threshold-slider to set a probability whether the event generates a trigger-impulse at the output or not.

randomRHYTHM has two modes: REALTIME and DICE. In REALTIME-mode, new random-values for all events are being generated all the time. In DICE-mode on the other hand, you can dice the random-values for a complete bar which will then be continuously repeated. In short: DICE is for generating cycling and more predictable random results whereas in REALTIME-mode randomness comes out on top.

Merk:

Vermona

Type:

Clock, Trigger, Sequencer

Naam:

RandomRhythm

Diepte:

25mm

Breedte:

24HP

Power:

110mA @ +12V

The Drum Sequencer is easy to use, classical X0X style live performance oriented sequencer module that provides the ultimate control over your system. Erica Synths Drum Sequencer might be the last modular sequencer for drums and basslines you will ever have to buy!

• 16x trigger outputs
• 12x accent outs
• 1x CV track with scales
• 1x Gate track
• 2x LFO with independent or synced to the BPM frequency
• LFO attenuation per out
• Max pattern length = 64 steps 
• Time signature per Track
• Direction per track/pattern
• Pattern length per Track
• Shuffle per track
• Probability per step
• Retrigger per step
• Time shift per step
• Instant pattern switching
• Solo/Mute tracks
• Step/Tap record modes
• 8 Banks of 16 Patterns
• Quick Copy/Paste per tracks & patterns
• Pattern linking
• Song mode
• MIDI sync in with Start/Stop
• External 4PPQ clock in
• Firmware upgrade via MIDI SysEx​​

Merk:

Erica Synths

Type:

Clock/trigger, sequencer, drum/percussion

Naam:

Drum Sequencer

Diepte:

30mm

Breedte:

42HP

Power:

152mA @ +12V, 56mA @ -12V